-
Mapping and characterising soft-sediment habitats, and evaluating physical...
A series of short field surveys in Jervis Bay, New South Wales, were undertaken by Geoscience Australia staff as part of the Surrogates Program in the Commonwealth Environmental... -
Standard Operation Procedures for a Multibeam Survey: Acquisition & Processing
The Australian Maritime Jurisdiction of approximately 7,000,000 km2 has, at most, 25% of its seabed surveyed at high resolution. Since September 2001, under Commonwealth Policy... -
A two-part seabed geomorphology classification scheme; Part 1: Morphology...
This brief report updates the ‘Two-part Seabed Geomorphology classification scheme’ of Dove et al. (2016) and presents a new glossary (Part 1) of Seabed Morphology features.... -
Seabed Sand Content Across the Australian Continental EEZ, 2011
This dataset provides the spatially continuous data of the seabed sand content (sediment fraction 63-2000 mm) expressed as a weight percentage ranging from 0 to 100%, presented... -
Seabed Environments and Subsurface Geology of the Capel-Faust Basins and...
This report contains the preliminary results of Geoscience Australia marine reconnaissance survey TAN0713 to the east margin of Australia. The survey, completed as part of the... -
Inter-reefal seabed sediments and geomorphology of the Great Barrier Reef, a...
Inter-reefal (i.e. non-reefal) seabed environments have been much less studied than the coral reefs, however they comprise 95% of the total Great Barrier Reef (GBR) Marine Park... -
Australian Maritime Zones in the Torres Strait
This map depicts the various maritime boundaries and zones in the Torres Strait. These include Australia`s jurisdictional maritime boundaries, as well as, the seabed and... -
Geomorphology and Habitats of Shelf Reefs, Southeast Tasmania
Flythrough movie showing the bathymetry of the shelf along the coast of southeast Tasmania, highlighting rock reefs as benthic habitats. The bathymetric image is derived from... -
Mapping Survey View
The mapping survey layer contains the surveyed extents of photogrammetric, topographic and lidar derived mapping survey completed to Main Roads specifications and standards.... -
Project Zone Error Threshold Models View
Project Zone error threshold models. A point scale factor map with a 20PPM threshold applied. Generated using geodetic calculations and Digital Elevation Models (DEM) data.This... -
Project Zones View
The project zones layer contains the extent of project zones used for completing engineering grade survey to Main Roads specifications and standards. Both GDA94 and GDA2020... -
Lansdowne SE52-05 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
Clarke River SE55-13 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
Jericho SF55-14 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
St George SH55-04 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
Bathurst SI55-08 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
Gordon Downs SE52-10 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
Barker SI54-13 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
Mount Elizabeth SE52-01 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the... -
Deniliquin SI55-13 - AUSTopo 1:250 000 digital map
This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the...