-
Franklin and Zeehan Marine Park fine-scale seafloor substrate mapping
Fine-scale bathymetry mapping was conducted in the Franklin and Zeehan Australian Marine Parks (AMPs) located off the west coast of Tasmania, Australia. The primary objective of... -
HABMAP Multi-beam Survey Coverage Areas
NSW Department of Climate Change, Energy, the Environment and Water
Areas of fine-scale Bathymetric and relative acoustic Backscatter data produced using a mounted Geoswath 125KHZ Interferometric sidescan sonar system, by the HABMAP program.... -
NSW bathymetry sourced from multibeam and marine lidar surveys
NSW Department of Climate Change, Energy, the Environment and Water
Bathymetric (depth) information were sourced from the NSW statewide marine lidar bathymetry data collected in 2018 and multibeam echosounder surveys conducted by the NSW... -
NSW seabed reef extent derived from marine lidar, multibeam and aerial imagery
NSW Department of Climate Change, Energy, the Environment and Water
Rocky reef polygons were delineated from bathymetry data for the NSW seabed. Bathymetry data was sourced from marine lidar data, multibeam echosounder data and aerial imagery.... -
Solitary Islands Marine Park (Commonwealth) marine ecosystems, substrates...
Marine ecosystems, substrates and geomorphic features have been classified using multibeam echosounder and marine lidar data for the Commonwealth Solitary Islands Marine Park...
1 - 5 of 5 results