From Australian Oceans Data Network
JSON format icon JSON RDF format icon RDF ISO19115-3 XML

IMOS - Ships of Opportunity - Ocean Carbon Dioxide Data from RV Southern Surveyor voyage ST032008

Created 23/06/2025

Updated 04/10/2025

JSON format icon JSON RDF format icon RDF ISO19115-3 XML

This data was collected in August 2008 by the IMOS Ship of Opportunity Underway CO2 Measurement research group on RV Southern Surveyor (IMOS platform code: VLHJ) voyage ST032008. Departed: Gladstone, Queensland, August 12, 2008 Arrived: Sydney, New South Wales, August 16, 2008 CO2 System Overview: The fugacity of carbon dioxide (fCO2) in surface seawater was measured using a General Oceanics Inc. automated system (Model 8050; Pierrot et al 2009). Seawater is sprayed into an equilibration chamber and CO2 in the headspace gas equilibrates with the seawater. The headspace gas is pumped through a thermoelectric condenser followed by a nafion drying tube before flowing through a Licor 7000 non-dispersive infrared gas analyser used to measure the CO2 mole fraction (XCO2) of the dried air. The gas flow is stopped temporarily for the CO2 measurements, which are made at atmospheric pressure. A set of four CO2 standards that cover the range of CO2 values expected in the ocean are analysed about every four hours to calibrate the gas analyser. The standard gas concentrations are on the WMO-X2007 mole fraction scale for CO2-in-air. Atmospheric XCO2 (dry) is measured after the standards by pumping clean outside air from an intake on the forward mast of the ship. Seawater intake and ancillary data: The seawater intake is located at about 5.5m depth in the bow of the ship. Sea surface salinity is measured using a thermosalinograph (Seabird Electronics SBE21) located next to the CO2 system. A remote temperature sensor (Seabird Electronics SBE 38) located at the intake is used to measure sea surface temperature (SST). The travel time between the intake and CO2 system is typically about 4 minutes with warming usually less than 0.6ºC. The thermosalinograph water is from the same intake, but the supply lines separate after the intake. A comparison of thermosalinograph and equilibrator temperature records shows the temperature difference in the two lines is generally less than 0.1ºC. The thermosalinograph water line travels outside the ship and is typically warmer than the equilibrator. The travel time in water line to the thermosalinograph is 2.5 minutes faster than to the equilibrator. Meteorological data, salinity, SST, and ships position and time are taken from the ships logging system. These parameters and the data quality are maintained by the Australian Marine National Facility.

Files and APIs

Tags

Additional Info

Field Value
Title IMOS - Ships of Opportunity - Ocean Carbon Dioxide Data from RV Southern Surveyor voyage ST032008
Language eng
Licence Not Specified
Landing Page https://data.gov.au/data/dataset/b9501897-ad69-4f35-92da-7bf3f180f6d1
Contact Point
Australian Ocean Data Network
info@aodn.org.au
Reference Period 13/08/2008 - 17/08/2008
Geospatial Coverage
Map data © OpenStreetMap contributors
{
  "coordinates": [
    [
      [
        150.0,
        -34.0
      ],
      [
        154.0,
        -34.0
      ],
      [
        154.0,
        -23.0
      ],
      [
        150.0,
        -23.0
      ],
      [
        150.0,
        -34.0
      ]
    ]
  ],
  "type": "Polygon"
}
Data Portal Australian Oceans Data Network

Data Source

This dataset was originally found on Australian Oceans Data Network "IMOS - Ships of Opportunity - Ocean Carbon Dioxide Data from RV Southern Surveyor voyage ST032008". Please visit the source to access the original metadata of the dataset:
https://catalogue.aodn.org.au/geonetwork/srv/eng/csw/dataset/imos-ships-of-opportunity-ocean-carbon-dioxide-data-from-rv-southern-surveyor-voyage-st032008