From Australian Oceans Data Network
JSON format icon JSON RDF format icon RDF ISO19115-3 XML

Trace-gas profiles of the boundary layer from Multi-Axis Differential Optical Spectroscopy MAX-DOAS collected during the SIPEX II voyage of the Aurora Australis, 2012

Created 23/06/2025

Updated 23/06/2025

JSON format icon JSON RDF format icon RDF ISO19115-3 XML

The current data set contains spectral atmospheric measurements from: - Multi-Angle Differential Optical Absorption Spectrometer (MAX-DOAS) - built in-house at NIWA Lauder by Dr Karin Kreher, Mr Paul Johnston and Mr Alan Thomas. Instrument description and setup details: MAX-DOAS Instrument Description: The MAX-DOAS instrument consists of a Czerny-Turner type ISA HR320 flat-field spectrograph with a focal length of 320 mm and an aperture ratio of F/4. The array detector is a Hamamatsu C7042 detector head with S7032-1007 sensor chip. The chip is back-thinned, allowing light to enter from the rear of the silicon substrate, which substantially increases the quantum efficiency over the whole spectral range, especially in the UV region (less than 400 nm). The sensitivity in the UV is important in order to obtain a good signal-to-noise ratio for BrO measurements. The detector signal is then passed to the computer via a 16-bit analogue to digital converter card. The detector is cooled to -20oC using a Peltier cooler to minimise the dark current noise caused by thermally excited electrons. The entrance optics consisted of an angled telescope mirror that reflects the measured light down through a focusing lens onto the entrance of a quartz fibre optic bundle leading into the spectrograph. The field of view of the telescope is ~0.5o. A webcam, also housed close to the entrance optics, records images of the sky in the spectrometer viewing direction at one minute intervals. These images are included in the dataset. Instrument Setup: The spectrometer was scanning wavelength regions in the UV-Vis region with a variable resolution spread over the pixel array CCD. Spectra were taken at multiple viewing angles (1,2,3,4,6,8,15,30,90o) in the open water and (-5,1,2,4,6,8,15,30,90o) in the ice (5th October - left ice) above the horizon. 90o is used as the reference viewing angle. Scattered sunlight was fed into the spectrometer using an optical fibre whose input was placed at the focal point of a lens receiving light from the rotating mirror which was setup to automatically adjust for the roll of the ship to maintain its viewing angle. The data is processed using 2 wavelength fitting regions as follows: M region: 323-348 nm in the UV retrieving: XS1=NO2 x 1e16, XS2=O3 x 1e19, XS6=O4x1e42, XS7=BrOx1e14, XS11 HCHOx1e16, XS12=slope O3 (to improve fit of O3 due to air mass changes with wavelength). And S region (visible) 416-443 nm, retrieving XS1=NO2 x 1e16, XS6=H2O x 1e22, XS7=O4x1e42, XS11=IOx1e14 The entrance optics of the tracker were cleaned daily using kimwipes. The dataset contains the following files: - FPS files, which are binary files generated by in-house software written by The National Institute of Water and Atmosphere (NIWA). - A MAX-DOAS log file, in text format - A MAX-DOAS error file, in text format - A configuration file, in text format

Files and APIs

Tags

Additional Info

Field Value
Title Trace-gas profiles of the boundary layer from Multi-Axis Differential Optical Spectroscopy MAX-DOAS collected during the SIPEX II voyage of the Aurora Australis, 2012
Language eng
Licence Not Specified
Landing Page https://data.gov.au/data/dataset/ec24c9e3-7530-4aa3-b6c3-bdee7397c210
Contact Point
Australian Ocean Data Network
metadata@aad.gov.au
Reference Period 14/09/2012 - 05/11/2012
Geospatial Coverage
Map data © OpenStreetMap contributors
{
  "coordinates": [
    [
      [
        119.0,
        -67.0
      ],
      [
        150.0,
        -67.0
      ],
      [
        150.0,
        -42.0
      ],
      [
        119.0,
        -42.0
      ],
      [
        119.0,
        -67.0
      ]
    ]
  ],
  "type": "Polygon"
}
Data Portal Australian Oceans Data Network

Data Source

This dataset was originally found on Australian Oceans Data Network "Trace-gas profiles of the boundary layer from Multi-Axis Differential Optical Spectroscopy MAX-DOAS collected during the SIPEX II voyage of the Aurora Australis, 2012". Please visit the source to access the original metadata of the dataset:
https://catalogue.aodn.org.au/geonetwork/srv/eng/csw/dataset/trace-gas-profiles-of-the-boundary-layer-from-multi-axis-differential-optical-spectroscopy-2012